CCNP

Best Cisco CCNP Training in NICL

NICL provides Best CCNP Training in Noida as per the current industry standards. Our training programs will enable professionals to secure placements in MNCs.

CCNP Cisco Course

Outline Exam Description

The ROUTE 300-101 exam will certify that the successful candidate has the knowledge and skills necessary to use
advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs. The exam also covers configuration of secure routing solutions to support branch offices and mobile workers.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam.

Implement an EIGRP based solution, given a network design and
a set of requirements

  • Determine network resources needed for implementing EIGRP on a network
  • Create an EIGRP implementation plan Create an
    EIGRP verification plan
  • Configure EIGRP routing
  • Verify EIGRP solution was implemented properly using show and debug commands.
  • Document results of EIGRP implementation and verification

Implement a multi-area OSPF Network, given a network design and a set of requirements

  • Determine network resources needed for implementing OSPF on a network
  • Create an OSPF implementation plan
  • Create an OSPF verification plan
  • Configure OSPF routing
  • Verify OSPF solution was implemented properly using show and debug commands
  • Document results of OSPF implementation and verification plan

Implement an eBGP based solution, given a network design
and a set of requirements

  • Determine network resources needed for implementing eBGP on a network
  • Create an eBGP implementation plan
  • Create an eBGP verification plan
  • Configure eBGP routing
  • Verify eBGP solution was implemented properly using show and debug commands
  • Document results of eBGP implementation and verification plan

Implement an IPv6 based solution, given a network design and
a set of requirements

  • Determine network resources needed for implementing IPv6 on a network
  • Create an IPv6 implementation plan
  • Create an IPv6 verification plan
  • Configure IPv6 routing
  • Configure IPv6 interoperation with IPv4
  • Verify IPv6 solution was implemented properly using show and debug commands
  • Document results of IPv6 implementation and verification plan

Implement an IPv4 or IPv6 based redistribution solution, given a
network design and a set of requirements

  • Create a redistribution implementation plan based upon the results of the
    redistribution analysis
  • Create a redistribution verification plan
  • Configure a redistribution solution
  • Verify that a redistribution was implemented
  • Document results of a redistribution implementation and verification plan
  • Identify the differences between implementing an IPv4 and IPv6
    redistribution solution

Implement Layer 3 Path Control Solution

  • Create a Layer 3 path control implementation plan based upon the results of the
    redistribution analysis
  • Create a Layer 3 path control verification plan
  • Configure Layer 3 path control
  • Verify that a Layer 3 path control was implemented
  • Document results of a Layer 3 path control implementation and verification plan
  • Implement basic teleworker and branch services
  • Describe broadband technologies
  • Configure basic broadband connections
  • Describe basic VPN technologies
  • Configure GRE
  • Describe branch access technologies

The SWITCH 300-115 exam will certify that the successful candidate has important knowledge and skills necessary to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam.

Implement VLAN based solution, given a network design and
a set of requirements

  • Determine network resources needed for implementing a VLAN based
    solution on a network
  • Create a VLAN based implementation plan
  • Create a VLAN based verification plan
  • Configure switch-to-switch connectivity for the VLAN based solution
  • Configure loop prevention for the VLAN based solution
  • Implement basic teleworker and branch services
  • Configure Access Ports for the VLAN based solution
  • verify the VLAN based solution was implemented properly using show and
    debug commands
  • Document results of VLAN implementation and verification

Implement a Security Extension of a Layer 2 solution, given a
network design and a set of requirements

  • Determine network resources needed for implementing a Security solution
  • Create an implementation plan for the Security solution
  • Create a verification plan for the Security solution
  • Configure port security features
  • Configure general switch security features
  • Configure private VLANs Configure VACL and PACL
  • Verify the Security based solution was implemented properly using
    show and debug commands
  • Document results of Security implementation and verification
    Implement Switch based Layer 3 services, given a network
    design and a set of requirements
  • Determine network resources needed for implementing a Switch based
    Layer 3 solution
  • Create an implementation plan for the Switch based Layer 3 solution
  • Create a verification plan for the Switch based Layer 3 solution
  • Configure routing interfaces Configure Layer 3 Security
  • Verify the Switch based Layer 3 solution was implemented properly
    using show and debug commands
  • Document results of Switch based Layer 3 implementation and verification
    Prepare infrastructure to support advanced services
  • Implement a Wireless Extension of a Layer 2 solution
    Implement a VoIP support solution
  • Implement video support solution

Implement High Availability, given a network design and
a set of requirements

  • Determine network resources needed for implementing High
    Availability on a network
  • Create a High Availability implementation plan
  • Create a High Availability verification plan
  • Implement first hop redundancy protocols
  • Implement switch supervisor redundancy
  • Verify High Availability solution was implemented properly using show and
    debug commands,
  • Document results of High Availability implementation and verification

The TSHOOT 300-135 exam will certify that the successful candidate has important knowledge and skills necessary to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.

Exam Topics
The following information provides general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam.

Maintain and monitor network performance

  • Develop a plan to monitor and manage a network
  • Perform network monitoring using IOS tools
  • Perform routine IOS device maintenance
  • Isolate sub-optimal internetwork operation at the correctly defined OSI
    Model layer Troubleshoot Multi Protocol system networks
  • Troubleshoot EIGRP
  • Troubleshoot OSPF
  • Troubleshoot eBGP
  • Troubleshoot routing redistribution solution
  • Troubleshoot a DHCP client and server solution
  • Troubleshoot NAT
  • Troubleshoot first hop redundancy protocols
  • Troubleshoot IPv6 routing
  • Troubleshoot IPv6 and IPv4 interoperability
  • Troubleshoot switch-to-switch connectivity for the VLAN based solution
  • Troubleshoot loop prevention for the VLAN based solution
  • Troubleshoot Access Ports for the VLAN based solution
  • Troubleshoot private VLANS
  • Troubleshoot port security
  • Troubleshoot general switch security
  • Troubleshoot VACL and PACL
  • Troubleshoot switch virtual interfaces (SVIs)
  • Troubleshoot switch supervisor redundancy
  • Troubleshoot IPv6 and IPv4 interoperability
  • Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video)
  • Troubleshoot a VoIP support solution
  • Troubleshoot a video support solution
  • Troubleshoot Layer 3 Security
  • Troubleshoot issues related to ACLs used to secure access to Cisco routers
  • Troubleshoot configuration issues related to accessing the AAA
    server for authentication purposes
  • Troubleshoot security issues related to IOS services (i.e.,finger, NTP,
    HTTP, FTP, RCP etc.)

Drop us a query

Popular Certifications